Tuesday, April 24, 2018

Helm/Tendick Wakizashi/Tanto Daisho Wakizashi

Note: These are available.  Check out the "Available Work" section for details.

Sometime last year I made an o-tanto that caught the eye of the very talented Ben Tendick of BRT Bladeworks in Oregon.  We had been wanting to do a collaboration for a while, and it seemed like a good direction to go.  The tanto was slated for someone, so I forged another, and ended up making a wakizashi in the same style as well.  I forged the blades, and Ben did the rest of the work.

Here's what was sent to Ben, a 16" and a 11.5" blade forged from 80CrV2 steel, heat treated and ready for Ben to work his magic on the handles.  I left the tangs big and blocky to give Ben plenty of canvas on which to paint.


Ben worked them down, shouldered the tangs to fit the tsubas, and drilled the holes to anchor the wrap.


I left all the details to Ben on how he wanted to finish.  He decided to use wrought iron for the tsubas.  In his words, "I did my best to capture that well used Ronin style in this set."




And copper menuki with his touchmark.


He went with antiqued cotton cord for the underlay. 


Finished up.

 






 
 
I think Ben nailed it.   8-)

Thursday, April 5, 2018

Benghazi Warfighters and Little Roks

Working on a small batch of mid-tech stock removal Benghazi Warfighters and Little Roks.  These are cut from 3/16" 80CrV2 steel, ground and heat treated, and coated with Cerakote.  They will be getting TeroTuf handle scales and Boltaron sheaths.  When finished, they will be available at Blue Line Gear.

Blue Line Gear

Wednesday, April 4, 2018

Camp chopper and Hisshou re-wrap

A couple more blades that have recently left my shop.

The first is a camp chopper traded to another knifemaker for a kitchen knife for my wife.  It's taken a loooong time for me to finish it up.  It has a 13" blade forged from 80CrV2 steel, with a tan over black paracord wrap and tan Kydex sheath.

 

The second is a re-wrap on a CRKT Hisshou, designed by James Williams.  I usually don't work on other people's blades, but this is the design that started me playing around with tanto designs of my own.  The customer had already stripped off the handle wrap and ray skin underlay, leaving the polymer bolster in place.  I laid down a neoprene foundation, followed by a tan paracord underlay and tang paracord overlay, with a three-strand Turk's head knot on top of the bolster.


The sheath on this is Boltaron, very similar to Kydex but less susceptible to temperature changes once molded.  I think it has some better definition as well.  The pistol holster guys like it.  This is what I'll be using on sheaths now.


The Hisshou is zero ground, something I've never done, but I touched it up with my stropping belt on my belt grinder with some green chrome compound.  He noticed, sayin, "It's friggin' shaving sharp!"  :D

Friday, March 30, 2018

Parangs and bolos

I recently forged out four choppers for inventory for the Blade Show, two parangs and two bolos.  A couple of customers came along and laid claim to one of each design, so now I have one parang and one bolo for Blade.  Better get hammering!

They were all forged from 3/16" 80CrV2 steel and came out light and fast in the hand.


The parangs ended up with hemp cord wraps and paracord Turk's head knots.  All of them got Boltaron sheaths.





The bolos got paracord wraps and fully sharpened top edges.  The one claimed by a customer got a "rattler" pattern camo paracord per the customer's request, as well as a shoulder sling.







Both customers were happy with their blades.  The fellow who got the parang sent some pictures of it being used for yard work, along with a blade from my buddy Tobin Nieto.





Always glad to see my blades put to work.  :)

Monday, March 26, 2018

Biohazard Outbreak Response Blade, Short

I've made a number of bush swords down through the years inspired by a certain blade in a zombie-killing video game.  They typically are around 15" blades.  Here's the first of this basic style to be made, back in 2015:
 
 
I recently made a shorter blade that is essentially the Biohazard Outbreak Response Blade scaled down to a 9 3/4" blade.  I really dig it!
 
This was the fastest knife to sell that I've done.  I had forged and trimmed to the rough shape, posted a picture on Instagram, and it was laid claim to within three minutes!  :D
 
Here's the initial picture:
 

It was finished out with a thick false edge, aggressifying the aesthetics but not coming close to a cutting edge.  The customer wanted a hemp cord wrap, and I topped it off with a three-strand Turk's head knot in paracord.
 

 
The sheath has my first-ever molded drainage hole at the tip, again per the customer's request.

 
 
Feels great in the hand!
 

 
In comparison with a tanto with an 8 7/8" blade.  Similar lengths, totally different knives!
 

The customer's response upon getting it was, "What is this damn monstrosity!"  In a good way.    :D

Saturday, March 17, 2018

Smaller knives, tantos and rooster spurs

I like making big knives, but of course make small ones too.  It's actually more difficult for me to make a 4" blade than a 12" blade.  Here are some littler ones that recently left the shop for new homes.  All are 80CrV2 steel with marine epoxy-impregnated wraps.

Two tantos.  The long, slim one has an 8 7/8" long blade.  The little kwaiken is a 4" blade, 4" handle, with hemp cord for the underlay on the wrap and paracord on top. 


And two rooster spurs.  The top one has a 5 1/2" blade, the bottom a 4" like the original.  Both have fully sharpened top edges.  This was a his-and-hers set, hence the pink camo cord on the bottom one.  :D

Donation knives and culinary knives

I can't afford to give away too many knives, but I do the occasional donation piece.  I *always* make sure to donate a blade to Knife Rights for their Ultimate Steel fundraiser (currently forged out), but these two are not for that.

The first is for a fundraiser at my old high school, raising money for teachers whose projects for their students go beyond the allotted budget.  I never have and never will have any school spirit, but I have a lot of respect for certain individual teachers because it was their efforts in conjunction with mine and not necessarily the institution itself that made a difference in my education.  I was approached by an old classmate to make a knife for the fundraiser and agreed to help the teachers going above and beyond the requirements.  I used a black and gold wrap because those are the school colors, of course.  :D  I demonstrated the wrap as a class I taught at Johnny Stout's Guadalupe Forge Hammer-in.


The second one is for WISH, a women's and children's shelter in Muskogee, Oklahoma.  As there was no requirement for a particular color scheme, I went with a subdued black-over-olive drab wrap.  I used this one to demonstrate making sheaths at the same Hammer-in, though I ran long with the wrap class and ended up having to finish out the sheath in a piecemeal fashion the rest of the day after molding.


The two together.  No reason for the difference in length, that's just how they ended up.  :D


And something well outside my usual wheelhouse, a couple of cooking knives ordered up for wedding gifts.  This is the first pair of a series of wedding gift knives since apparently everyone the customer knows is getting married.  The customer wanted a 3" paring knife and a 6" chef knife.  Handles are red G10 with black G10 liners and black G10 with red G10 liners.


 I have made a small handful of cooking knives in the past and never really been happy with them.  I've had a lot of trouble with warping due to the thinness of the blades, so in this case I didn't forge the blades at all but cut them from 1/8" 80CrV2 and heat treated them at full thickness.  That, of course, meant grinding the bevels carefully so as not to ruin the temper.  The VFD controller on my new AmeriBrade grinder helped a lot in that department.  The customer wanted a 3" paring knife and a 6" chef knife.


He picked them up in person.  Good guy!  Not the first knife nor the last he'll be getting from me.  The finish on these is a machine finish with a Scothbrite belt, with the handles buffed on a fine Scotchbrite ball.  They're coated in butcher's block mineral oil (contents: mineral oil).